Skip to content Skip to footer

Diffusion OLPF – Gold

From £480.00

Gold softens and expands highlights, retaining sharp focus. The specialised dichroic  particles split warm and cool colour temperatures, softening skintone and warming harsh light sources, while keeping cool and shadow areas crisp and clean. Bokeh is rendered faithfully to the taking lens, with only slight patterning.

Available in two diffusion densities, both using  KipperTie’s own optimised colour calibration.

Clear
SKU: JBM004-5 Categories: , Product ID: 9874

Comparisons

Drag the image slider for comparison

Gold 1

Before After

 

Gold 2

Before After

What are the advantages?

  • No matte box required
  • No internal reflections
  • Consistent across focal lengths
  • Works with any lens

Scientific grade optics

Perfect colour calibration and precise technical standards

Artisan production

Diffusion created with skilled hand-application of microscopic particles.

Frequently Asked Questions

Technical

DSMC 1 cameras require manual selection of OLPF type in all cases.
DSMC2 cameras will detect (on start-up only) the general type of OLPF fitted. RED original filters will select a single fixed calibration, KipperTie’s 3rd party filters will allow the user to select their choice of colour calibration, and allow the entry of custom metadata to describe the OLPF.

Category: Technical

For diffusion filters, please select ‘Skintone Highlight’ as the calibration in the OLPF menu.

DSMC2: Click ‘none’, change to ‘3rd party’ and then select ‘Skintone Highlight’ and add custom data if required to describe filter type

For false colour filters, please select ‘None’ or ‘Low light optimised’ as the calibration in the OLPF menu.

DSMC2: Choose ‘none’, or change to ‘3rd party’ and then select ‘Low light optimised’ and add custom data if required to describe filter type.

Category: Technical

Black shading is not affected by OLPF choice. If a change in OLPF calibration type reveals any fixed pattern noise, your blackshade was already incorrect. Follow the standard procedure for sensor calibration in this case.

Category: Technical

DSMC2 – OLPF swapping is safe and reasonably trivial. Only one tool is needed, all screws are captive, and nothing that is exposed in the process is more sensitive than might be exposed during a lens swap. As a rule of thumb, if it is safe to swap lenses, its safe to swap OLPFs.

DSMC1 – OLPF swapping is simple but requires care and precision. Small loose screws mean that this is best carried out with the camera tilted back at 45 degrees, on a work bench, or at worst on a camera cart in a clean environment.

Category: Technical

Due to the sophisticated coatings, cleaning OLPFs can be somewhat tricky. First of all assess in camera whether marks visible to the eye actually show up in your image. Don’t clean unless essential. The design of the camera is such that is much more forgiving than you would expect. Bear in mind that with any diffusion filter you will potentially see the filter particles if you shoot at a very deep f-stop, and it is often only at that deep stop that dirt on the filter also becomes visible.

A bulb type blower for dust removal should be the first tool. If that does not work, remove the OLPF from the camera and use canned air to blow the glass clean. Note: keep the can motionless and upright, and move the filter around, not vice-versa.

For grease and smears, any kind of lens cleaning fluid is acceptable. Our factory uses pure alcohol, but again, do this with the filter removed from the camera. Use multiple soft lens tissues, discarding after each wipe.

Category: Technical

If you have a specific requirement for a different colour calibration, a different strength of diffusion or a particular wavelength false-colour filter, we can provide these. Minimum order quantities for colour calibrations and wavelengths will apply.

Category: Technical

Load More

Technical

DSMC 1 cameras require manual selection of OLPF type in all cases.
DSMC2 cameras will detect (on start-up only) the general type of OLPF fitted. RED original filters will select a single fixed calibration, KipperTie’s 3rd party filters will allow the user to select their choice of colour calibration, and allow the entry of custom metadata to describe the OLPF.

Category: Technical

For diffusion filters, please select ‘Skintone Highlight’ as the calibration in the OLPF menu.

DSMC2: Click ‘none’, change to ‘3rd party’ and then select ‘Skintone Highlight’ and add custom data if required to describe filter type

For false colour filters, please select ‘None’ or ‘Low light optimised’ as the calibration in the OLPF menu.

DSMC2: Choose ‘none’, or change to ‘3rd party’ and then select ‘Low light optimised’ and add custom data if required to describe filter type.

Category: Technical

Black shading is not affected by OLPF choice. If a change in OLPF calibration type reveals any fixed pattern noise, your blackshade was already incorrect. Follow the standard procedure for sensor calibration in this case.

Category: Technical

DSMC2 – OLPF swapping is safe and reasonably trivial. Only one tool is needed, all screws are captive, and nothing that is exposed in the process is more sensitive than might be exposed during a lens swap. As a rule of thumb, if it is safe to swap lenses, its safe to swap OLPFs.

DSMC1 – OLPF swapping is simple but requires care and precision. Small loose screws mean that this is best carried out with the camera tilted back at 45 degrees, on a work bench, or at worst on a camera cart in a clean environment.

Category: Technical

Due to the sophisticated coatings, cleaning OLPFs can be somewhat tricky. First of all assess in camera whether marks visible to the eye actually show up in your image. Don’t clean unless essential. The design of the camera is such that is much more forgiving than you would expect. Bear in mind that with any diffusion filter you will potentially see the filter particles if you shoot at a very deep f-stop, and it is often only at that deep stop that dirt on the filter also becomes visible.

A bulb type blower for dust removal should be the first tool. If that does not work, remove the OLPF from the camera and use canned air to blow the glass clean. Note: keep the can motionless and upright, and move the filter around, not vice-versa.

For grease and smears, any kind of lens cleaning fluid is acceptable. Our factory uses pure alcohol, but again, do this with the filter removed from the camera. Use multiple soft lens tissues, discarding after each wipe.

Category: Technical

If you have a specific requirement for a different colour calibration, a different strength of diffusion or a particular wavelength false-colour filter, we can provide these. Minimum order quantities for colour calibrations and wavelengths will apply.

Category: Technical

Load More

Technical

DSMC 1 cameras require manual selection of OLPF type in all cases.
DSMC2 cameras will detect (on start-up only) the general type of OLPF fitted. RED original filters will select a single fixed calibration, KipperTie’s 3rd party filters will allow the user to select their choice of colour calibration, and allow the entry of custom metadata to describe the OLPF.

Category: Technical

For diffusion filters, please select ‘Skintone Highlight’ as the calibration in the OLPF menu.

DSMC2: Click ‘none’, change to ‘3rd party’ and then select ‘Skintone Highlight’ and add custom data if required to describe filter type

For false colour filters, please select ‘None’ or ‘Low light optimised’ as the calibration in the OLPF menu.

DSMC2: Choose ‘none’, or change to ‘3rd party’ and then select ‘Low light optimised’ and add custom data if required to describe filter type.

Category: Technical

Black shading is not affected by OLPF choice. If a change in OLPF calibration type reveals any fixed pattern noise, your blackshade was already incorrect. Follow the standard procedure for sensor calibration in this case.

Category: Technical

DSMC2 – OLPF swapping is safe and reasonably trivial. Only one tool is needed, all screws are captive, and nothing that is exposed in the process is more sensitive than might be exposed during a lens swap. As a rule of thumb, if it is safe to swap lenses, its safe to swap OLPFs.

DSMC1 – OLPF swapping is simple but requires care and precision. Small loose screws mean that this is best carried out with the camera tilted back at 45 degrees, on a work bench, or at worst on a camera cart in a clean environment.

Category: Technical

Due to the sophisticated coatings, cleaning OLPFs can be somewhat tricky. First of all assess in camera whether marks visible to the eye actually show up in your image. Don’t clean unless essential. The design of the camera is such that is much more forgiving than you would expect. Bear in mind that with any diffusion filter you will potentially see the filter particles if you shoot at a very deep f-stop, and it is often only at that deep stop that dirt on the filter also becomes visible.

A bulb type blower for dust removal should be the first tool. If that does not work, remove the OLPF from the camera and use canned air to blow the glass clean. Note: keep the can motionless and upright, and move the filter around, not vice-versa.

For grease and smears, any kind of lens cleaning fluid is acceptable. Our factory uses pure alcohol, but again, do this with the filter removed from the camera. Use multiple soft lens tissues, discarding after each wipe.

Category: Technical

If you have a specific requirement for a different colour calibration, a different strength of diffusion or a particular wavelength false-colour filter, we can provide these. Minimum order quantities for colour calibrations and wavelengths will apply.

Category: Technical

Load More

Technical

DSMC 1 cameras require manual selection of OLPF type in all cases.
DSMC2 cameras will detect (on start-up only) the general type of OLPF fitted. RED original filters will select a single fixed calibration, KipperTie’s 3rd party filters will allow the user to select their choice of colour calibration, and allow the entry of custom metadata to describe the OLPF.

Category: Technical

For diffusion filters, please select ‘Skintone Highlight’ as the calibration in the OLPF menu.

DSMC2: Click ‘none’, change to ‘3rd party’ and then select ‘Skintone Highlight’ and add custom data if required to describe filter type

For false colour filters, please select ‘None’ or ‘Low light optimised’ as the calibration in the OLPF menu.

DSMC2: Choose ‘none’, or change to ‘3rd party’ and then select ‘Low light optimised’ and add custom data if required to describe filter type.

Category: Technical

Black shading is not affected by OLPF choice. If a change in OLPF calibration type reveals any fixed pattern noise, your blackshade was already incorrect. Follow the standard procedure for sensor calibration in this case.

Category: Technical

DSMC2 – OLPF swapping is safe and reasonably trivial. Only one tool is needed, all screws are captive, and nothing that is exposed in the process is more sensitive than might be exposed during a lens swap. As a rule of thumb, if it is safe to swap lenses, its safe to swap OLPFs.

DSMC1 – OLPF swapping is simple but requires care and precision. Small loose screws mean that this is best carried out with the camera tilted back at 45 degrees, on a work bench, or at worst on a camera cart in a clean environment.

Category: Technical

Due to the sophisticated coatings, cleaning OLPFs can be somewhat tricky. First of all assess in camera whether marks visible to the eye actually show up in your image. Don’t clean unless essential. The design of the camera is such that is much more forgiving than you would expect. Bear in mind that with any diffusion filter you will potentially see the filter particles if you shoot at a very deep f-stop, and it is often only at that deep stop that dirt on the filter also becomes visible.

A bulb type blower for dust removal should be the first tool. If that does not work, remove the OLPF from the camera and use canned air to blow the glass clean. Note: keep the can motionless and upright, and move the filter around, not vice-versa.

For grease and smears, any kind of lens cleaning fluid is acceptable. Our factory uses pure alcohol, but again, do this with the filter removed from the camera. Use multiple soft lens tissues, discarding after each wipe.

Category: Technical

If you have a specific requirement for a different colour calibration, a different strength of diffusion or a particular wavelength false-colour filter, we can provide these. Minimum order quantities for colour calibrations and wavelengths will apply.

Category: Technical

Load More

(+44) 1753 656568

UK Office

Copyright © 2020 KipperTie Ltd. All rights reserved.

Coronavirus status update - September 2020

Products:

All products are available with normal lead times.

Production:

Filming is now possible for many types of communication, with remote camera technology or skeleton social distanced crews. Post production and animation continue as normal with remote working in effect.

Office:

Our Pinewood Studios office is open by appointment only. All pickups and deliveries should contact us on 01753 656568 or email to establish which KipperTie location should be used.