Skip to content Skip to footer

OLPF fitting safety mask – DSMC1

£10.00

For the clumsy, paranoid and the rest of us too. Protect your OLPF and sensor as you install and remove its screws with our plastic safety guard.

Simply hold it in place by hand, or pop a couple of lens mount screws in finger-tight if you’re working in a difficult environment. Then proceed to remove or re-tighten the OLPF screws through the cutouts without fear of slipping or dropping the screws onto the glass.

We intend this to be used with our magic-tip torx screwdriver, for maximum practicality.

Available as build-to-order

SKU: JBM905 Category: Product ID: 3540

Frequently Asked Questions

Purchasing

We recommend purchasing from our trusted resellers or from this site wherever possible. Local resellers will give the fastest service and the full retail facilities you would expect. If time is not critical, or you have no local reseller we offer free worldwide 5 to 7 day shipping from our online store.

Abelcine in the USA now hold good stock levels on most products.

Worldwide resellers include:
AbelCine – abelcine.com – Los Angeles, New York, Chicago, USA
Advanced Media Technology – amt.tv – Dubai, UAE
AV8 Media – av8.com.sg – Singapore
Raid Inc – raid-japan.com – Tokyo, Japan

Category: Purchasing

We are currently changing our stock indication protocol.

Currently ‘in stock’ means that we hold all necessary parts to assemble a product. It’s a lot like ordering a car that has your own specification – it is subject to assembly and testing time, and final QC which can cause delays prior to actual shipping. Our supply chain process has been undergoing improvements – make no mistake, we are new at this, so delivery time has not been optimal in many cases.

From 1st January 2017, ‘In stock’ on our website will mean we have pre-built, pre-packaged, QC-passed products ready for immediate shipping.

‘Available to order’ will refer to the above process, where we hold components in stock ready to build to order.

We will continue to allow back-orders, and to offer discounted pre-orders where applicable, and as always we trust that our customers understand that lead times here are estimated only.

Category: Purchasing

We do not offer trials or rental filters, however our products are stocked by many leading RED rental houses.

In addition, our resellers are required to carry demo items for users to test.

Category: Purchasing

KipperTie are part of RED’s approved third party product programme.

Category: Purchasing

We are happy to offer technical support and advice directly by email. Please get in contact, ideally quoting your order number so that we can identify your exact product.

For product warranty and replacement issues, please contact your reseller first, or KipperTie directly if purchased online.

Category: Purchasing

Load More

Purchasing

We recommend purchasing from our trusted resellers or from this site wherever possible. Local resellers will give the fastest service and the full retail facilities you would expect. If time is not critical, or you have no local reseller we offer free worldwide 5 to 7 day shipping from our online store.

Abelcine in the USA now hold good stock levels on most products.

Worldwide resellers include:
AbelCine – abelcine.com – Los Angeles, New York, Chicago, USA
Advanced Media Technology – amt.tv – Dubai, UAE
AV8 Media – av8.com.sg – Singapore
Raid Inc – raid-japan.com – Tokyo, Japan

Category: Purchasing

We are currently changing our stock indication protocol.

Currently ‘in stock’ means that we hold all necessary parts to assemble a product. It’s a lot like ordering a car that has your own specification – it is subject to assembly and testing time, and final QC which can cause delays prior to actual shipping. Our supply chain process has been undergoing improvements – make no mistake, we are new at this, so delivery time has not been optimal in many cases.

From 1st January 2017, ‘In stock’ on our website will mean we have pre-built, pre-packaged, QC-passed products ready for immediate shipping.

‘Available to order’ will refer to the above process, where we hold components in stock ready to build to order.

We will continue to allow back-orders, and to offer discounted pre-orders where applicable, and as always we trust that our customers understand that lead times here are estimated only.

Category: Purchasing

We do not offer trials or rental filters, however our products are stocked by many leading RED rental houses.

In addition, our resellers are required to carry demo items for users to test.

Category: Purchasing

KipperTie are part of RED’s approved third party product programme.

Category: Purchasing

We are happy to offer technical support and advice directly by email. Please get in contact, ideally quoting your order number so that we can identify your exact product.

For product warranty and replacement issues, please contact your reseller first, or KipperTie directly if purchased online.

Category: Purchasing

Load More

(+44) 1753 656568

UK Office

Copyright © 2019 KipperTie Ltd. All rights reserved.